THE PARAMETERANALYTICAL SUBSTANTIATION OF THE ROOT TUBER CROP GRINDER
Journal: BULLETIN OF KSAU
№ 9
, 2014
Rubrics: TEHNIKA
Authors:
1.
Dal'nevostochnyy gosudarstvennyy agrarnyy universitet
2.
Dal'nevostochnyy gosudarstvennyy agrarnyy universitet
Type:
Article
Pages:
from 206
to 211
Status:
Published
Received:
21.09.2014
Accepted:
23.09.2014
Published:
25.09.2014
Subject area:
UDK 631:363(031)
Language:
Russian
Keywords:
root crop, grinding degree, disk grinder, mathematical model
Abstract (English):
The results of the technological process research of the root tuber crop grinding are considered in the article. The analytical dependences on the parameter calculation of their highly effective grinding are established. The analytical models characterizing the grinder through put capacity with its constructive and mode parameters are received.
The results of the technological process research of the root tuber crop grinding are considered in the article. The analytical dependences on the parameter calculation of their highly effective grinding are established. The analytical models characterizing the grinder through put capacity with its constructive and mode parameters are received.
Keywords:
root crop, grinding degree, disk grinder, mathematical model
root crop, grinding degree, disk grinder, mathematical model
1. Kryuchkova L.G., Docenko S.M., Isachenko A.N. Tehnologicheskaya liniya prigotovleniya belkovo-uglevodnogo kormovogo produkta // Tehnika v sel'skom hozyaystve. - 2013. - № 4. - S. 10-11.
2. Pat. № 2124283, Rossiyskaya Federaciya. Izmel'chitel' tykvy i korneplodov / S.M. Docenko [i dr.] // B.I. - 1999. - № 1. - S. 15.
3. Mel'nikov S.V. Mehanizaciya i avtomatizaciya zhivotnovodcheskih ferm. - L.: Kolos, 1987. - 560 s.
