MATHEMATICAL MODEL FOR PRESSING THE PLATES ON THE BASIS OF SHREDDED STRAW AND THERMOPLAST
Journal: BULLETIN OF KSAU
№ 5
, 2012
Rubrics: MATEMATIKA I INFORMATIKA
Authors:
1.
Sibirskiy gosudarstvennyy tehnologicheskiy universitet
2.
Sibirskiy gosudarstvennyy tehnologicheskiy universitet
Type:
Article
Pages:
from 71
to 76
Status:
Published
Received:
21.05.2012
Accepted:
23.05.2012
Published:
25.05.2012
Subject area:
674.815-41
Language:
Russian
Keywords:
straw, pressing, polyethylene, two-phase system, porosity, thermoplast, technological mode, mathematical model, regional conditions, hardening
Abstract (English):
The results of modeling the processes occurring in the pressing of plates made of shredded wheat straw particles and thermoplast are given. Temperature distribution over the plate thickness, thermoplast hardening degree and thermal stresses are estimated quantitatively.
The results of modeling the processes occurring in the pressing of plates made of shredded wheat straw particles and thermoplast are given. Temperature distribution over the plate thickness, thermoplast hardening degree and thermal stresses are estimated quantitatively.
Keywords:
straw, pressing, polyethylene, two-phase system, porosity, thermoplast, technological mode, mathematical model, regional conditions, hardening
straw, pressing, polyethylene, two-phase system, porosity, thermoplast, technological mode, mathematical model, regional conditions, hardening
1. Knunyanc I.L. Himicheskiy enciklopedicheskiy slovar'. - M.: Sovetskaya enciklopediya, 1983. - 790 s.
2. Modelirovanie svoystv i processov pressovaniya reaktoplastov / V.D. Kotenko [i dr.]. - M.: GOU VPO MGUL, 2005. - 284 s.
3. Malkin A.Ya., Kulichihin S.G. Reologiya v processah obrazovaniya i prevrascheniya reaktoplastov. - M.: Himiya, 1981. - 240 s.
4. Stavrov V.P., Dedyuhin V.G., Sokolov A.D. Tehnologicheskie ispytaniya reaktoplastov. - M.: Himiya, 1981. - 246 s.
