CALIBRATING CHARACTERISTICS OF THE RADIATION THICKNESS GAUGE OF THE AUTOMATED SYSTEM FOR CLEANING THE CYCLONE INSIDE WALLS FROM THE FINE WOOD DUST DEPOSITS
Journal: BULLETIN OF KSAU
№ 6
, 2012
Rubrics: MATEMATIKA I INFORMATIKA
Authors:
1.
Ural'skiy gosudarstvennyy lesotehnicheskiy universitet
2.
Ural'skiy gosudarstvennyy lesotehnicheskiy universitet
Type:
Article
Pages:
from 25
to 32
Status:
Published
Received:
21.06.2012
Accepted:
23.06.2012
Published:
25.06.2012
Subject area:
UDK 674 Деревообрабатывающая промышленность
Language:
Russian
Keywords:
wood processing, cyclone, radionuclear technique, calibration characteristics, error, range
Abstract (English):
Radionuclear technique for measuring the near wall deposit thickness is offered by the authors as a result of researching the process of the cyclone inside wall cleaning from the fine wood dust deposits. Descriptions of the characteristic and specific peculiarities of the devices, which operate on the radionuclear technique principles and main functions of the devices, which handle the signals of the radionuclear device in condition of necessary application of the sources with minimum radiation level are given.
Radionuclear technique for measuring the near wall deposit thickness is offered by the authors as a result of researching the process of the cyclone inside wall cleaning from the fine wood dust deposits. Descriptions of the characteristic and specific peculiarities of the devices, which operate on the radionuclear technique principles and main functions of the devices, which handle the signals of the radionuclear device in condition of necessary application of the sources with minimum radiation level are given.
Keywords:
wood processing, cyclone, radionuclear technique, calibration characteristics, error, range
wood processing, cyclone, radionuclear technique, calibration characteristics, error, range
1. Pirumov A.I. Obespylivanie vozduha. - M.:Stroyizdat,1981.
2. Vetoshkin A.G. Processy i apparaty pyleochistki: ucheb. posobie. - Penza: Izd-vo Penz. gos. un-ta, 2005.
3. Matematicheskie metody v avtomatizacii tehnologicheskih processov stroitel'stva / V.A. Vorob'ev [i dr.]. - Almaty.: Gylym, 1997.
4. Kouzov P.A., Mal'gin A.D., Skryabin G.M. Ochistka ot pyli i gazov vozduha v himicheskoy promyshlennosti. - L.: Himiya, 1982.
