OPERATION MODELING OF THE PNEUMO AND HYDRAULIC DRIVE OF THE ROTOR DEBARKING MACHINE CUTTER KNIFE
Journal: BULLETIN OF KSAU
№ 8
, 2012
Rubrics: TEHNIKA
Authors:
1.
Ural'skiy gosudarstvennyy lesotehnicheskiy universitet
2.
Ural'skiy gosudarstvennyy lesotehnicheskiy universitet
Type:
Article
Pages:
from 145
to 150
Status:
Published
Received:
21.08.2012
Accepted:
23.08.2012
Published:
25.08.2012
Subject area:
UDK 630.323
Language:
Russian
Keywords:
rotor debarking machine, hydraulic drive, pneumatic drive, rotor, cutter knife, modeling, algorithm
Abstract (English):
The algorithm for modeling the operation of the pneumo and hydraulic drive of the rotor debarking machine cutter knife is offered. The problem can be solved on the basis of the model structure development and taking into account the modeling problem description. The algorithm allows to develop the mathematical model of the cutter knife pneumo and hydraulic drive most correctly.
The algorithm for modeling the operation of the pneumo and hydraulic drive of the rotor debarking machine cutter knife is offered. The problem can be solved on the basis of the model structure development and taking into account the modeling problem description. The algorithm allows to develop the mathematical model of the cutter knife pneumo and hydraulic drive most correctly.
Keywords:
rotor debarking machine, hydraulic drive, pneumatic drive, rotor, cutter knife, modeling, algorithm
rotor debarking machine, hydraulic drive, pneumatic drive, rotor, cutter knife, modeling, algorithm
1. http://www.valonkone.com [Elektronnyy resurs].
2. http://www.debarking.com [Elektronnyy resurs].
3. Pobedinskiy V.V., Berstenev A.V., Shunyaev S.N. Modelirovanie rabochih processov rotornogo okorochnogo stanka v srede MatLab // Sb. dokl. k mezhdunar. nauch.-tehn. konf. UGLTU (Ekaterinburg, 21-23 sentyabrya 2006). - 2006. - S. 135-137.
