HYDRAULIC DRIVE MODELING IN THE �MATLAB+SIMULINK� ENVIRONMENT
Journal: BULLETIN OF KSAU
№ 11
, 2013
Authors:
1.
Sibirskiy federal'nyy universitet
2.
Sibirskiy federal'nyy universitet
3.
Inzhenerno-stroitel'nyy institut Sibirskogo federal'nogo universiteta
Type:
Article
Pages:
from 243
to 248
Status:
Published
Received:
21.11.2013
Accepted:
23.11.2013
Published:
25.11.2013
Subject area:
UDK 625.084/085:625.855.3
Language:
Russian
Keywords:
drive, pump, distributor, pipelines, hydroscheme, macroblock, «MATLAB+SIMULINK», pressure, density, working liquid
Abstract (English):
The program for modeling the vibrating compacting equipment drive is developed by the authors of the article. The schemes of the hydraulic drive aggregates with the progressive movement and their mathematical models are given.
The program for modeling the vibrating compacting equipment drive is developed by the authors of the article. The schemes of the hydraulic drive aggregates with the progressive movement and their mathematical models are given.
Keywords:
drive, pump, distributor, pipelines, hydroscheme, macroblock, «MATLAB+SIMULINK», pressure, density, working liquid
drive, pump, distributor, pipelines, hydroscheme, macroblock, «MATLAB+SIMULINK», pressure, density, working liquid
1. Emel'yanov R.T., Prokop'ev A.P., Klimov A.S. Modelirovanie rabochego processa gidroprivoda s drossel'nym regulirovaniem // Stroitel'nye i dorozhnye mashiny. - 2009. - № 11. - S. 62-64.
