PRODUCING OF THE WOOD BOARD IN THE FORM OF DEPRESSED SHELLS
Journal: BULLETIN OF KSAU
№ 10
, 2014
Authors:
1.
Sibirskiy gosudarstvennyy tehnologicheskiy universitet
2.
Krasnoyarskiy institut zheleznodorozhnogo transporta
3.
Sibirskiy gosudarstvennyy tehnologicheskiy universitet
Type:
Article
Pages:
from 178
to 181
Status:
Published
Received:
21.10.2014
Accepted:
23.10.2014
Published:
25.10.2014
Subject area:
UDK 674.815-41.05
Language:
Russian
Keywords:
wood board, depressed shell, specified bending, temperature imbalance
Abstract (English):
It is shown that it is possible to set such a temperature mode of pressing, in which the finished wood board will have a constructive bend of a given shape and size.The zones of the temperature imbalance of the pressing surfaces are determined.
It is shown that it is possible to set such a temperature mode of pressing, in which the finished wood board will have a constructive bend of a given shape and size.The zones of the temperature imbalance of the pressing surfaces are determined.
Keywords:
wood board, depressed shell, specified bending, temperature imbalance
wood board, depressed shell, specified bending, temperature imbalance
1. Spravochnik po proizvodstvu drevesnostruzhechnyh plit / I.A. Otlev [i dr.]. - 2-e izd., pererab i dop. - M.: Lesn. prom-st', 1990. - z84 s.
2. Gulimov V.G. Oborudovanie dlya pressovaniya drevesnovoloknistyh plit. - M.: Lesn. prom-st', 1983. -56 s.
3. Plotnikov S.M. Ustranenie pokoroblennosti drevesnostruzhechnyh plit temperaturnoy asimmetriey pressovaniya // Derevoobrabatyvayuschaya prom-st'. - 2008. - № 2. - S. 6-8.
4. Kolkunov N.V. Osnovy rascheta uprugih obolochek: ucheb. posobie. - M.: Vyssh. shk., 1987. - 256 s.
